Activox XYC105B Operator's Manual download pdf (Page 12)

2. AC Adapter/Charger: An AC Adapter/Charger allows the POC to be powered

from a standard 100-240 VAC, 50/60 Hz

outlet. When the unit is operated from an AC

Adapter/Charger, power from the AC outlet

powers the unit and recharges the internal

and/or External Battery. (See Battery

Charging section for details.)

Using an AC Adapter/Charger that is not

specified by Inova Labs with the POC

may damage the unit and will void all

warranties.

3. DC Adapter/Charger: A DC Adapter/Charger can be connected from

the POC unit to a vehicle’s (car, boat, motor

home, etc.) standard 12 VDC outlet. When

the system is connected to the DC outlet,

power from the vehicle battery powers the

POC unit and recharges the Internal and/

or External Battery. (See Battery Charging

section for details.)

NOTE: The 12 VDC outlets in some pre-2000 model cars will not provide

sufficient current to operate the POC and charge the battery at the same

time. Verify that a DC outlet can provide at least 10 amps at 12 VDC. Car

auxiliary power varies significantly; therefore, the rate of charging will

vary. It is recommended that the vehicle be turned on before plugging

the DC Adapter/Charger into the POC.

4. External Battery: To power the POC from an external battery, connect

the External Battery to the External Battery Port. A

fully charged external battery will supply power to the

POC for up to three hours. (Reference Battery Life

Timetable as battery life will vary depending upon

model, breath rate and Pulse Setting.)

When the POC is being powered from the External

Battery, the Battery Check LED labeled “EXT”

will be slowly flashing. Pushing the Battery Check

Button will display the charge level of the External

Battery.

INTERNAL BATTERY CHARGING

1. Connect the unit to either an AC or DC Adapter and corresponding

charger to a suitable outlet.

2. With the unit powered off, verify that the INT Battery Check LED is solid

green and the Power LED is flashing green. This indicates that an external

power source is recognized and the battery is charging.

OPERATING

INSTRUCTIONS

continued

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Comments to this Manuals

No comments

Activox XYC105B Operator's Manual Page 12

Comments to this Manuals

Related products and manuals for Oxygen Equipment Activox XYC105B